On Tue, Feb 21, 2017 at 8:17 AM, Hunter Somerville <
hsomervi5790@gmail.com>
wrote:
>
> On Thu, Feb 9, 2017 at 4:23 PM, Charles Manning <cdhmanning@gmail.com>
> wrote:
>
>> Hi Hunter
>>
>> On Fri, Feb 10, 2017 at 8:57 AM, Hunter Somerville <
>> hsomervi5790@gmail.com> wrote:
>>
>>> On Tue, Feb 7, 2017 at 3:44 PM, Charles Manning <cdhmanning@gmail.com>
>>> wrote:
>>>
>>>> On Tue, Feb 7, 2017 at 5:19 AM, Hunter Somerville <
>>>> hsomervi5790@gmail.com> wrote:
>>>>
>>>>> Hello,
>>>>>
>>>>> We are encountering an issue where we will usually lose an entire
>>>>> partition of data if the flash device loses power during a write operation.
>>>>> When we bring the system back up and remount, all files/directories appear
>>>>> as long strings of questionmarks with incorrect filenames and such, and we
>>>>> end up having to flash erase the partition to recover. This only happens on
>>>>> the device with fairly large pages (4MB Erase blocks, 32KB pages, 1KB OOB),
>>>>> and does not occur on the more typical device in the same system which uses
>>>>> 4KB pages.
>>>>>
>>>>
>>>> What kind of flash are you using? What part number?
>>>>
>>>
>>> The hardware is proprietary, and not designed by us. What I can tell you
>>> is that we interface with an FPGA - not the flash chips directly. The FPGA
>>> performs the writes.
>>>
>>
>> Surely the flash parts are off the shelf.
>>
>
> I'm getting permission on this. They're Samsung parts.
>
> We've discovered that mounting the partition as read-only after powerloss
> demonstrates that the data is all present and correct, aside from the file
> which was actively being written. I can read back any of the files and
> verify their contents. If at any point I mount this partition as read-write
> after the powerloss, yaffs appears to mark all blocks as unused and then
> proceeds to garbage collect every block. My files all slowly disappear.
>
> yaffs: Collecting block 3, in use 1, shrink 0, whole_block 0
> yaffs: Collecting block 3 that has no chunks in use
> yaffs: yaffs_block_became_dirty block 3 state 8
> yaffs: yaffs_tags_marshall_read chunk 256 data ef1f0000 tags ef6f5cd8
> yaffs: packed tags obj -1 chunk -1 byte -1 seq -1
> yaffs: ext.tags eccres 1 blkbad 0 chused 0 obj 0 chunk0 byte 0 del 0 ser 0
> seq 0
> yaffs: yaffs_tags_marshall_read chunk 257 data ef1f0000 tags ef6f5cd8
> yaffs: packed tags obj -1 chunk -1 byte -1 seq -1
> yaffs: ext.tags eccres 1 blkbad 0 chused 0 obj 0 chunk0 byte 0 del 0 ser 0
> seq 0
> .......
> yaffs: yaffs_tags_marshall_read chunk 382 data ef1f0000 tags ef6f5cd8
> yaffs: packed tags obj -1 chunk -1 byte -1 seq -1
> yaffs: ext.tags eccres 1 blkbad 0 chused 0 obj 0 chunk0 byte 0 del 0 ser 0
> seq 0
> yaffs: yaffs_tags_marshall_read chunk 383 data ef1f0000 tags ef6f5cd8
> yaffs: packed tags obj -1 chunk -1 byte -1 seq -1
> yaffs: ext.tags eccres 1 blkbad 0 chused 0 obj 0 chunk0 byte 0 del 0 ser 0
> seq 0
> yaffs: Erased block 3
>
> I can't yet figure out why it's marking these blocks as unused when there
> are clearly files present. Any help on this matter would be greatly
> appreciated.
>
Hello Hunter
That sounds pretty weird.
The only time I've ever seen something like that happen was when there was
a bug in the driver so that the flash got mapped twice. (ie the driver
said the part was, say, 32 MB but was actually just accessing the first
16MB twice).
When you get issues like this it is often also a good thing to first just
try a small partition (say 20 blocks). That way there's a lot less detail
and you can maybe spot the patters quicker.
If you're using Linux, have you tried testing the drivers by just using the
mtdtools to run tests?
-- Charles
(text/plain)
